MicroTouch Systems FPD Touch Monitor Especificaciones descargar pdf (Pagina 77)

Chapter 2 Firmware Commands 77

Sensitivity Set

Note:

MicroTouch provides this command for compatibility with older touchscreen

controllers. To ensure compatibility with all existing and future MicroTouch controllers,

do not use this command when developing your touch drivers and applications.

Syntax: <SOH>SEn<CR>

where:

n = Sensitivity level.

0 = Normal touch (default)

1 = More sensitive (level 1)

2 = Very sensitive (level 2)

3 = Most sensitive (level 3)

Description: Changes the sensitivity of the touchscreen. Use the sensitivity setting

to adjust the touch for differences in systems and touchscreen

implementations. You can adjust the sensitivity level for your personal

preference.

Upon execution of this command, the sensitivity setting (touchdown

threshold and liftoff threshold), the current operating modes, and the

current data format are stored in the controller’s non-volatile memory

(NOVRAM).

Response: <SOH>0<CR> Positive response.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 120 121

Sin comentarios

MicroTouch Systems FPD Touch Monitor Especificaciones Pagina 77